SP TAKEGAWA (Special Parts TAKEGAWA) lineups a number of big bore kit and customization parts mainly for 4MINI motorcycle like APE, MONKEY and GORILLA. Extremely popular because of its good performance and quality
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
exellent produit.il a ete tres facile de le monter sur mon st70 6volt de 1973 avec le mode d'emploi et les outil adequates.
On ressent vraiment la qualité de takegawa.
Tout marche très bien sur mo...
The bolt retainer looks great for the cosmetic finishing for any bikes. This made it looks more proper and takegawa made the material looks high quality. Thats great!
If you can think of it as the same etc. as the old KEIHINPC18, it is the same thing.Nice thing1 Response at low and medium speeds has changed dramatically.If it is about 2 75cc, I think the diameter o...
First of all, I checked the Jet before installation and found that both Throw and Main had shiningly shavings. If you use it without checking, it will be clogged. If you use it without checking, it wi...
It's nice to have better footing. The fluffiness is gone. I don't think the road should be so jumpy.It's fine for moderate groundwork. It's just a shame that the price is higher than the performance.
I installed it on my Grom, I had to twist my body to see the back of the OEM mirror, but now I can see better. With this Opposite Thread Screw Type, you can meet the new safety standard by using NORMA...
I put this mirror on my Grom. it's better visibility than normal mirror where I had to twist my body to see the back. With this reverse screw type, I can use NORMAL Mirror Adapter to meet the new secu...
I was able to install it on my SUPER CUB110 JA44 without any problems.I was looking for an Engine Guard to run on forest roads, but I couldn't find one for my SUPER CUB110.I happened to find the insta...
This is a must-have part for carburetor setting, because it is always bad when you mess with the intake and exhaust system of KSR110. However, it is not possible to use it as it is as shown in the rev...
I used it on a CUB50 revision 75.If you have a normal clutch, it will slip, so it's better to do it to properly transfer the Up power to the drivetrain.By the way, I install it myself, so I hope you c...
 |  | |
| | | |
| |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | | |
 |  | |
| | |
Scooter drivetrain maintenance essentialsWe can't start without it.KN Planning:KN KikakUniversal Holder SUZUKI Serieshttps://www.webike.net/sd/22644793/I bought it to use at the same timeEasy to use a...
There are two types of Recoil packets, 1D and 1.5D, but basically, if you buy 1D, it's not a problem There is none. Because even in JIS. The Bolt's cost is only 1D, as long as the female threads are i...
I used it to exchange Flywheel of LETS 4.Because it is universal, it seems that it can be used for other car models, but the frequency of use is not so high, so it is a product that can not be said so...
When installing Takegawa's Clutch cover, it is necessary to change this.Oil route is slightly processed from OEM Product.Hand dexterous people will be able to process OEM Product, but it is conven...
I bought it for FORZAMF 08 Drive belt exchange. Although the price was reasonable and there was anxiety about the product strength, it was relieved with firm making to actually take it. We use Impact ...
 | |  |
| | | |
 |  |  |
| | | |
I bought it to improve the loading space of my cbr.I put my shoes in it twice and was able to use it properly, but the connection between the mouth of the drawstring and the netted part of the drawstr...
High precision engineering in a quality product. Kit contains everything needed for easy installation. Immediate performance gains by this kit. NOTE - need to run high octane fuel due to increased com...
Installation on the seat was quick and easyHowever, when I pulled the Seat on the motorcycle to test the extension after it was installed, I found that it was not as long as it should be The side open...
I used to use Seesaw Pedal, but it's kind of a normal Shift I wanted to make a change and replaced it Since I only have to remove and replace it, the installation was completed without any problemIt f...
I installed a TM24 Carburetor on my 2nd TDR80I didn't have space to install the Funnel or Power Filter, so it can fit I was looking for things and came across this productAs it is designed for use wit...
These emblems looks very good and they are the best quality you can get. I'm definitely happy with this purchase and can recommend these to other buyers.
However, I can't really feel whether the capacity of this product is getting bigger and bigger It is a disappointing product, but I think it is useful I think you can put it on even if it's not booted
I chose this product to be compatible with Takegawa Special ClutchIt's very easy to install to the Handlebar as you only need the Bolt1 pc If you tighten it up, it won't turn aroundI don't think you w...
Running has improved, but Spring plays and vibration comes out at a constant number of revolutions.Quantity : 2pc. Set I purchased but I think that it is not an individual defective item because the s...
 | | |
| | |
头盔锁当然是必须的，被偷过的都知道它的重要性，尤其是对于被偷了一个限量版Arai的我……车头装了手机支架和另一个头盔锁，而最近交了新的女朋友，又买多了一个头盔，就愣着不知道怎么装另外一个锁，恰好在Webike找到了这个，原来还能装在脚踏上方，厉害了。
The helmet lock is of course a must, and the stolen ones know its importa...
I installed it on z 125.I found this item when I was worrying about putting a helmet lock at which position, it was a colleague!Result The satisfactory shopping was made ♪
Since there was no Helmet holder, NINJA 400r was attached.
Although there was also make of the other company, the product made from a Takegawa was used.
Since it puts, and it is crowded and it is no...
Although the portions of a Key-cylinder part and a Hook also had good black if they may be allowed to wish so much, is it impossible, considering paint application peeling?
Using feeling intensity is...
I addapted this to fit my Monkey with G Craft billet rack and it worked perfectly. I drilled an additional hole in the mount and used the standard Honda Helmet lock so one key fits all
Attachment is also easy and it has also satisfied the fixing position well exactly! The portion which hangs a Helmet thinks that the size which is generous to a slight degree could be sufficient as h...
[Webike Monitor] Like the direction besides , since pure user-friendliness was bad, it purchased.
Since attachment also attaches the description, it is easy.
Like the Helmet holder currently attache...
During parking, since it was inconvenient, removing a sheet one by one was looking for the Holder suitable for CBR250R.
Since it had general-purpose article, wearing was considered, but this product ...
since it does not get used to the mind using the helmet holder under a pure sheet -- introduction -- I turned on the step [ not the appointed mounting arrangement but ] side, and have put in and equip...
Although changed to GSXR-750 (L1) recently, the helmet holder is attached to the SS type vehicle only under the rear seat. Since he wanted to have carried out somehow or other and to attach a helmet h...
| |  | |
| | |
Fashion costs. Style you have it or you don't. Wearing this Takegawa t-shirt you've got STYLE and FASHION without the cost! As Iv'e come to expect from Takegawa they have chosen a quality product to a...
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
About our "Mybike" service 
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING