- Motorcycle Parts
- Engine Parts
- Ignition Parts
- Spark Plugs
- NGK
- NGK - Spark Plugs
- Product list
- Standard Plug B7ES 1111
Standard Plug B7ES 1111
Product # B7ES
553.6 PKR (301 JPY)
List price: 754.08 PKR Save 27%
+3 Webike point (5.51 PKR)
Product # B7ES
553.6 PKR (301 JPY)
List price: 754.08 PKR Save 27%
+3 Webike point (5.51 PKR)
Plug / Terminal | separating type |
Plug type | Standard |
Plug / NGK thermal value | 7 |
Plug / DENSO compatible | W22ES/W22ES-L/W22ES-U/W22ES-U11 |
Plug/Yamaha genuine part number compatible | 9079E-ND042/94701-00044/94702-00044/94703-00044 |
Plugs / Honda genuine part number compatible | 98079-57810/98079-57840 |
Plug/Suzuki genuine part number compatible | 09482-00089/09482-00195 |
Plug / KAWASAKI genuine part number compatible | 92070-1002/92070-1032/92070-3003 |
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
Model Page Links
4.5 / 5
750 reviews
Fits: HONDA CB250T 73-, HONDA CB350 68-, HONDA CB360T 75-, HONDA CB500T 74-, HONDA CJ250T 76-
The heat value of the OEM Plug was 8 Because of the age of the motorcycle, Carbon has accumulated around the electrodes and electrodes of the plug I've put away the Engine
It was the first time in two years that I replaced the Plug Because the heat value was lowered, I think that I will see the self-cleaning state of the plug The fireplace is now in place and the Engine's startability has improvedView Detail
Fits: HONDA CB250T 73-, HONDA CB350 68-, HONDA CB360T 75-, HONDA CB500T 74-, HONDA CJ250T 76-
As this is an old car, I don't have a choice I've tried a few compatible Iridium plugs, but it doesn't feel right Windshield I stock a lot of them because they are cheaper than IRIDIUM and I change them to Small BlisterView Detail
Fits: HONDA CB250T 73-, HONDA CB350 68-, HONDA CB360T 75-, HONDA CB500T 74-, HONDA CJ250T 76-
This time I bought a little in bulk I'm not sure about the Manufacturer's designation The unit price is cheap, but I'm not so sure about the durability of this product It would be nice if they lasted a little longerView Detail
Fits: HONDA CB250T 73-, HONDA CB350 68-, HONDA CB360T 75-, HONDA CB500T 74-, HONDA CJ250T 76-
Due to curiosity, I tried various such as Windshield IRIDIUM of each company, things with different heat value, but I think that the one specified by Manufacturer is No. 1 again. You can blow pleasantly from bottom to top. Because it is an old car Windshield IRIDIUM inevitably underneath it could not be blown down. After that it is durable, but it is cheap, so it is best to stock and replace the Small seriously.View Detail
Fits: HONDA CB250T 73-, HONDA CB350 68-, HONDA CB360T 75-, HONDA CB500T 74-, HONDA CJ250T 76-
It is a good item. The quality is also stable. Plug is a consumable item, so it is better to change it if you get lost. It is a solid quality. Whether you leave or remove Aluminum Bolt on the top, you always get lost.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Please select option before add to your cart.
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.