One set for each side Spring rate: Stock vs: Approx. 20% increase Designated fork oil quantity (one side): 86ml Designated fork oil level (without spring): 69mm Spring free length: 248.5mm
*Follow the service manual issued by the bike manufacturer. *Front fork oil quantity, viscosity, and oil level adjustment are the same as the standard standard. *Please assemble the spring with wider pitch to the lower side.
After repeated actual driving tests, the optimum spring rate was set to reduce unpleasant pitching and yawing, and to improve the stability of the bike under braking and cornering.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Изначально на V125 слабая вилка, поставил от ZZ. Но она все равно мягкая так как по сути отличие только в крепление оси колеса. В следствии заказал эти пружины. Качеством очень доволен, они на 3 см длинее, жестче и металл толще. Вилка сразу заработала по другому. Я рад.Initially, the V125 is a weak plug, set from ZZ. But it is still soft because in fact the only difference is in the mounting of the wheel axle. As a result, I ordered these springs. Very pleased with the quality, they are 3 cm longer, tougher and the metal is thicker. Fork immediately earned differently. I am glad.translated by Google TranslatorView Detail
Since Rear was made into KITACO, Front was more dissatisfied with Rear than Rear, and it was also replaced at the same time. As Rear got harder, the frustration of Front got an extra Large. It is hard to describe, but if you do not rely on it, do you have a feeling of no sense. Even though it runs even though it runs a lot after the construction work, although it runs, although it runs, it only runs paved roads for the time being, but Seal also gets useless at about three months and leaks Oil.View Detail
ADDRESS V125 (K9) It installed in. The reason for purchasing changed to 200? Brake rotor because Front fork lost to Brake and bottomed out.
In the case of K9 MODEL it is necessary to remove the top bolt of Fork, so it is necessary to pull out the three-fork or to cut out the upper plastic part. Although it is not directly related to the making of this product, I think that installation is troublesome compared to the previous MODEL.
In order to suppress the initial subduction by applying a pre-road, it is made slightly longer compared to OEMSpring. Therefore, it is Large strangle to tighten the top bolt of Fork after exchanging Spring. To open and close Top bolt you need 17 mm Hexagonal Wrench or 17 mm Long nut.
It is said that Spring rate 20% Up, but I feel like it has become extremely hard up to that feeling after stitching. I actually felt a little comfortable, but I feel that the feeling of stability has increased since it is no longer fluffy by cornering at intersections etc..
In OEMSpring, what was bottomed with full Brake ceased to be bottomed.
However, I wonder whether Damper lost to Spring this time or if I step on the Large Yu Gap, I feel like Spring like a suspension like Damper coming out through forever.
If you want to strengthen Front in earnest, I think that it is better to replace it with a complete set of Other Company Product. "I do not want to make extravagant at Other Company Product" "I want to make it harder than NORMAL" I think that we can recommend to people like.View Detail
It is simultaneous exchange with KITACO Fork-oil KYBG10S.It purchases from Mr. Webike at 8 beginning of the month, and although exchange with a bon holiday was expected, a blot of the Oil from a Fork is discovered! Naturally brand-name parts, such as an Oil seal, were ordered from Mr. Webike. If it gets on, it will sink for a while, but when it begins to run, there is no Pitching over change of a road surface, and it often strokes, and is working firmly. Since it thinks that it always still exchanged and a Spring has not got used, either, I would like to contribute anew later.View Detail
Since 12 inch was formed, it has equipped with ZZ Front fork.After all, since it was 50 cc of foundations and weight was also uncertain to a certain me at the peak, ZZ was strengthened.It can use satisfactorily.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!