Material: S45C (High carbon steel) Size: 428 Race only Recommended number of chain links: 428 x 110L
*428 size drive sprocket and drive chain are required to install 428 size. *When 16T or more is installed on Grom, a wide chain guide plate is required separately.If you change the license of knives to other than the stock number, there will be an error in the speedometer display.In this case, please use the speed pulse conversion unit. *The sprocket is a consumable item. *Inspect the sprockets every 1000km as a guide for general driving.(If the tip of the tooth has become thin, replace it with a new one.The life of the sprocket and chain can be greatly improved by daily lubrication.) *Rear sprocket T number ÷ Front sprocket T number = Reduction ratioThe higher the value of this reduction ratio, the more emphasis is placed on acceleration, and the lower the value, the more emphasis is placed on maximum speed. *The Grom requires a 428 size drive sprocket and drive chain. *The stock chain for Super Cub 110 and Cross Cub 110 is 428 size. *Super Cub 110 / Super Cub 110-Pro / Cross Cub 110 (Stock: 14T), Grom (Stock (420): 15T) *Please refer to the compatibility chart for the stock number of knives. *There may be changes in product specifications due to manufacturer's reasons.
Ideal for tuned engines!Sized-up chains reduce maintenance cycles!
428 size compatible drive sprocket (14T) lineup. S45C (high carbon steel) is used for the drive sprocket. In the case of the Grom, the drive chain is one size larger, so it can be used for engines with increased power.The larger chain size improves durability and reduces maintenance cycles.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
About quality and texture: I am happy with the quality of the front sprocket from Kitaco. The 16 tooth 428 pitch front sprocket is manufactured from high carbon steel with lightning holes. About the feeling of use: The main reason I removed the OEM Honda front sprocket was to increase the size of the front sprocket to help lower the RPM of the 181cc BBK when crusing at high speed and allow for the fitment of a thicker stronger chain. Products to buy together: A larger sprocket guard plate would also be desirable to purchase alongside the front sprocket for additional clearance when using a larger front sprocket. Difficulty of installation: The process to install takes about 15 minutes. Remove the sprocket cover and back off the chain tension. Remove the two bolts that hold the locking plate and then remove the sprocket. Install the new sprocket, secure the locking plate and make a chain adjustment. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a front sprocket made from a durable material and designed with the best performance in mind at a great price as compared to the basic styled front sprockets from the other bands and non as cheap in the 16 tooth size. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you wish to swap front sprockets for a change in tooth size then inspect your current driven sprocket and drive chain to see if they will be suitable to use with your new front sprocket and if not then purchase all three parts together. View Detail
Challenge to raise 1T of CUB standard DriveSprocket I went through the process of purchasing a Sprocket that I hit in the My Motorcycle registration, but I couldn't find it. I was so disappointed that I could not do anything during the 2 to 3 days it took to ship the product. I have been using the site for a few years now, and I have been very pleased with the service. I was disappointed that I could not install it because it was a product with a good texture.View Detail
I have about 15,000 miles on my Grom. I've ridden a wide range of vehicles from commuting to touring. I thought it was about to wear out, so I replaced it. I'm glad I bought it because I've heard it's more durable than OEM. Reasonable as the price isn't that high!View Detail
The combination of Fr and Rr Sprocket is up to the rider's preference and I'm happy with it for suburban and long distance riding. From spring to early summer, I will go to the mountains to pick wild vegetables, so I plan to return Fr to its original state.
I recommend the FrSprocket replacement because you don't have to pack the Chain (only adjust the tension?). It's a good idea. When you FrUp, don't forget to replace the Sprocket guard! The CROSS CUB is the one without the dents on the front.View Detail
Please select How did you get to know about Webike Japan?
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!