*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage. *Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF. *Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal. *Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle. *Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty. *Do not look directly at the LED light when it is on.It can cause visual impairment. *Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature. *This product is for motorcycles only, so cannot be used on four-wheeled vehicles.This product is not for use on automobiles. *Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite. *Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns. *This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary. *When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product. *Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury. *When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual. *Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow. *Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended. *Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics. *Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair. *If you feel any abnormality during installation or use, please contact PROTEC Service Department.
The combination of the stock headlight lens and H4 LED (30w) provides a brightness that far surpasses the stock LED!!!
34100 candela!Headlight kit to increase the brightness by simply replacing the stock LED headlight of 17- CB1100EX. Luminescence color is white 6000 Kelvin.
All the necessary parts for installation are included. Simply replace the stock LED headlights with the headlights included with this product and install the dedicated connection harness and controller. The Lo beam of the stock LED headlight emits light at 10.8w, which is about the same brightness as a 55w halogen bulb in terms of lumens. By replacing with PROTEC's LED headlight, the brightness is increased many times and the irradiation range is widened and safety is improved. The difference of the power consumption is 2.7 times, but you can feel the brightness more than 2.7 times.
■Do you feel that the stock LED headlights are too dim? The stock LED headlight of '17-CB1100EX / RS is 10.8W, which is the same brightness as halogen bulb.If you look at the image that LED is brighter than conventional bulbs, you will be disappointed in the brightness of normal LED.Unlike the bulb type headlight, the stock LED headlight can not be brightened by replacing with aftermarket LED.This product enables to install PROTEC H4 LED bulb by replacing the headlight unit, and the headlight will be many times brighter.
■Clear multi-reflector lens The lens surface of the stock LED headlight has four projector lenses in the center and four round position lamp lenses around the periphery, making it look like the lights on the ceiling of an operating room, so it is heard that many users feel uncomfortable with the design of the headlight.The familiar HONDA stock multi-reflector lens can be used to create a clean look and feel.
■Available color temperatures are 6000K and 3000K Please select your favorite color from two colors: 6000 Kelvin, which is a typical LED blue-white color, and 3000 Kelvin, which is a classic halogen bulb color.
The maximum luminous intensity is 34100 candela.The optical axis can be adjusted to the standard range without shifting.Protec has introduced the BANZAI HT-322 headlight tester to measure the headlights at the time of development.
■Adoption of reliable CREE LED! A total of 6 CREE XLamp XP-L LEDs (3 for Hi beam and 3 for Lo beam) are used as light emitters.
■Waterproof electric fan cooling A really bright LED generates heat due to the large input current and becomes hot.In order to cool down the heat, this product adopts a cooling system with a highly durable waterproof electric fan.It is essential equipment to maintain stable brightness.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
CB1100EX and RS PRO projector headlights from 2017 onwards are uncomfortable If you feel this is a good choice, you can make a recommendation The color of the lamp is white with a retro feel to it The brightness of the light is not a problem The instruction manual is polite, and I think that there is no hesitation about Wiring However, because the back of the Headlight becomes Large than NORMAL, I think that Headlight is not used Space is tight when you install it I think that's the only thing that's a hassle I thought it was a bit pricey, but once I installed it I was very happy with itView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!