Very high quality material used. Installation is very simple. The price is reasonable but it does it purpose very well.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Very high quality material used. Installation is very simple. The price is reasonable but it does it purpose very well.
Fits: HONDA NC750X 21-, HONDA NC750X 14-20, HONDA NC700X 12-13, HONDA NC750S 14-, HONDA NC700S 12-13
You can't adjust the distance from the Tire, or the Clearance adjustment up and down, or even the Plate itself, which is bent, but you can't even adjust that. All you have to do is assemble it and go with it whether it is bent or not.
20,000.00 Over is way too much for this!
I bought a Chinese one for less than 5,000 yen, but I should have bought a Chinese one from the beginning because it looks nice and can be adjusted in many ways.View Detail
Fits: YAMAHA MT-09 21-, YAMAHA MT-09 SP 21-
The OEM Inner fender was short and I was worried about the dirt and the Rear suspension.
I thought it was a bit expensive, but I couldn't find any other suitable products, so I took the plunge and bought it.
I couldn't trust the tape that came with the product, so I used my own 3M Ultra Strong Double-Sided Tape, but the first time I put it on, I put it on a little off, and it started to peel off, so I put it on again so it wouldn't shift, and now it's somehow stable.
To put it bluntly, the product itself is just black hard plastic, and I think it's worth at most a couple of thousand yen. It's more effective than nothing, but after the rain, the mud is still bouncing around.
If you had sold it for at least 5,000 yen, I might have been satisfied...View Detail
There is a lot of mud splatter when you use the Fender Eliminator. So I put these on. I posted this about 2 weeks after I put it on and it got rained on during my commute. I also work from home, so I haven't tested it enough, but it's nice.
Installation is very easy. Clean with the included AlcoholSeat
It is glued with Double-sided Tape and left for 12 hours.
I leave it crimped with Shako. After that, I drill the clip of the attachment with M2Drill and melt the reverse side with a lighter to make it difficult to peel off. So far, it has come without a problem. It is convenient if you have the type that does not have a shako in the home center because it is sold for 2~3 hundred yen. The instruction manual is included and it was kind to the beginner.View Detail
Fits: SUZUKI GSX-S1000 15-, SUZUKI KATANA 19-, SUZUKI GSX-S1000GT 22-, SUZUKI GSX-S1000FA 15-
Screw hole applicable, with mounting
Bumpy back side.
It's hard, trying to keep it clean, you know?
Well, is this what motorcycle parts are like?
Out of all the Motorcycle FRP Parts I bought, the only one that was not modified was the Tank Cover for the New Model KATANA by Ohno Speed... (And the back side was clean too!)
Do you guys install them without worrying about it?
You're leaving it up to the Shop, and you don't even know it...?View Detail
Fits: SUZUKI SFV650 Gladius 09-16, SUZUKI SV650X 18-, SUZUKI SV650N 16-
There is almost no distortion or Gap that I was worried about, and the Fit feeling is OK.
However, because there was rubbing with the tire center part, it was necessary to correct the mounting hole of the chain case part. It's easy to fix, because it's just a matter of changing the round hole to a long circle. So I made a crescent-shaped piece to prevent it from returning.
The mud splash to the rear shock that I was concerned about has almost disappeared, but because it was applied to the Swing Arm, I additionally made a Flap.
It's still early days, so I need to keep an eye on the distortions and gaps over the long term, but for now, I'm generally satisfied.View Detail
Very strong material used. The installation is simple and quick. It is an OEM product, and the price is very reasonable.View Detail
Very high quality product. Easy and quick to install with . The price is of average range (neither cheap nor expensive).View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING