There are some conspicuous areas where the processing is messy.
Manufacturer and sales were horrible to deal with.
Manufacturer & seller pushes defective products to the buyer without inspecting them.
I wonder how reluctant they are to handle returns.View Detail

Repair marks on the Crack are so-so and the machining accuracy is poor. And Gap. We tried to be as careful as possible, but there were three cracks. It is not.

I thought the tank was bad and tried it with a different tank, but it did not fit after all.

One Side comes out of the air ductor even if you try to put the tank on the body. It is not possible to use it.

View Detail

About quality and texture - The cable adjuster fat type from SP Takegawa is made from billet aluminium with precision machining and a black anodized surface finish while the quality from the overall fit and finish is perfect.About the feeling of use - The wonderful design of the cable adjuster does wonders increasing the appeal of the Monkey 125 by allowing the removal of the original zinc coated and less then ideal cable adjuster from Honda.Products to buy together - A key product to purchase to further increase the appeal of the Monkey 125 by the removal of more of the less then ideal original parts, would be the noticably large front fork guards that are available in a slimmer aluminium finish from a few aftermarket suppliers.Difficulty of installation - The installation of the cable adjuster is a simple task that took 0.3 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is all that is required to release the tension off the clutch cable, fit the cable adjuster to the clutch perch and re-tension the clutch cable.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the cable adjuster is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the cable adjuster, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic.View Detail

About quality and texture - The breather mini filter from Shift Up is made from a dry multi-layered cotton gauze filter with a rubber top and rubber base, the quality from the overall fit and finish is perfect.About the feeling of use - A necessary addition for my custom air filter install due to the main air filter not having a breather fitting to connect up the crankcase breather hose. Very compact in it's design making it perfect to squeeze up into the tight space below the fuel tank.Products to buy together - Another product to purchase when looking to complete a custom air filter install would be some clear breather hose, the clear hose will allow you to monitor any oil or moisture build up leading up to the breather filter.Difficulty of installation - The installation of the breather mini filter is a simple task that took 0.1 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to press the breather filter into the breather hose and secure with the includer hose clamp.Cost performance and comparison with other products - I find the cost of all the products Shift Up sell to be on par when compared to what most other companies sell their products for and the breather mini filter is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the breather mini filter, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The air filter cover round taper from SP Takegawa is made from a breathable polyester with a water resistant coating, the quality from the overall fit and finish is perfect.About the feeling of use - A nice addition for my custom air filter install. When I decide to remove the original air box and replace it with a open air filter on any motorcycle, I am always concerned about riding in wet weather but with this product now fitted I am a little less concerned.Products to buy together - Another product to purchase when looking to further increase your wet weather protection on the Monkey 125 would be a low mount front fender kit, that way the water spray fron the front wheel better contained and less likely to cover the engine.Difficulty of installation - The installation of the air filter cover round taper is a simple task that took 0.1 of an hour complete. Common sense and the use your hands is what is required to pull the air filter cover over the air filter and secure the elastic side around the air filter base.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the air filter cover round taper is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the air filter cover round taper, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The air filter round taper 42 mm from SP Takegawa is made from a dry multi-layered cotton gauze filter with a metal top and rubber base, the quality from the overall fit and finish is perfect.About the feeling of use - The heart behind my custom air filter install. Very compact in it's design that is perfect for squeezing it into some tight spacers. The metal chrome finished top is a nice touch on the Monkey 125.Products to buy together - Another product to purchase when looking to further increase the performance on the Monkey 125 would be a full exhaust system, which when paired together will allow for a freer air flow through the engine.Difficulty of installation - The installation of the air filter round taper 42 mm is a simple task that took 0.7 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to gain aceess, remove the original air box and secure the air filter round taper 42 mm to the throttle body inlet tube.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the air filter round taper 42 mm is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the air filter round taper 42 mm, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The tuck 'n roll seat from SP Takegawa is made using plastic for the seat base and a synthetic tuck 'n roll material for the seat cover, the quality from the overall fit and finish is perfect.About the feeling of use - Improved appearance from the lower compact design with only a small loss of comfort from the seat sponge used. The flat seat is my preference over the other stepped seats available but I do prefer the other seats with the lower sides that expose the seat rails when compared to this seat which is like the original seat it that respect.Products to buy together - A key product to purchase when looking to slim down the appearance of the Monkey 125 would be a fender eliminate, to allow the removal of the original tail extension that adds unnecessary length to the motorcycle.Difficulty of installation - The installation of the tuck 'n roll seat is a simple task that took 0.3 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the seat to the frame.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the tuck 'n roll seat is no different.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the tuck 'n roll seat, I chose sea freight to save some money as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail