16,228.92 PKR
(8,830 JPY)
4 (10 Reviews)
Average
Suction Cup ReplacementI had been using it for a long time because it was just the right size, but the suction cup was ruined and I had to replace it.
Suction Cup replacement for this Bag is not possible Type, but it would be easy to do, and I did it!
All you need is Cutter, Nipper or Radio pliers, etc. and a hundred Suction CupQuantity:2pc. SetInputQuantity:2 Sets.
https://jp.daisonet.com/collections/remodeling0206/products/4549131632637
Suction Cup can be easily cut by pulling it under tension.
? When cut, you will see a steel core, pull it out using pliers, etc.
? but this is also the case. Robust. It had to be this sturdy to keep it from coming off. The GRUGRU was pulled out by pinching it with the nipper and using the leverage of the wrist. The Cushion material is not necessary, so it was discarded.
Drilling holes. Drilling a hole. you can drill through with a cutter, but I melted the hole size because I had a solder iron.
Pass the Suction Cup through the Hook and fasten the Hook at the back. This hook is easy to break if you screw it on as it is, so you can easily insert and remove it by attaching a flange. If it breaks, use a ring or something to hold it in place.
Left is Before, Right is After
It's not terribly difficult, but you need a nipper that you can grab tightly, even if it's a hundred bucks!
Special note
This is its successor? This is the type that can replace the Suction Cup.
https://www.webike.net/sd/20110672/
Highly recommended as the price is the same.
Reviews For DEGNER Sucker-Type Fuel Tank Bag From Other Webike User
Excellent
It's a little on the large side.It is the Large size of the Limit on the Tank, but I think it is good because if this size is not there, the heat insulation Bottle will not fit.
When I cut the Handlebar, it hits the Navigation System Case, so I plan to move the Navigation one separately.
I'll add a photo.View Detail
Excellent
Not too Large, not too SmallIn fact, it is a little Large threshold in Tank of DUKE200, but because I wanted to put 500ml insulated Bottle, this Size is necessary.
The front side of the Tank of DUKE is not attached because it is uneven, and it is fastened with the Belt with Snap that I have. The Suction Cup on the back side is attached to the tank by a screw. I am considering the belt type handmade so that it may be easy to put on and off at the time of refueling.
The thick texture is very good and solid, which is more expensive than the cheap ones from China Site. Of course, the transparent vinyl part is not wavy and thick. [Color] Clear
The topmost section is for thin items. There is a divider that can be moved, a card holder, and a small coin purse.
It is not suitable because it runs out of heat even at the time of the fine weather of March when I leave a smart phone and Navigation in. First of all, it's too close to the front and you can't see it at all in sunlight. (Lol)
If there is an ETC, I don't need small change anymore, and it's just an Accessory Case.
The bottom section has a telescopic bellows that can be expanded to hold a Rain Cover and a 500ml insulated bottle when it's Small, or a Large if you want to take a few souvenirs.
It comes with a Rain Cover, but if I had fastened it loosely, it would have flown away with the wind pressure while driving! (Lol)
If you want to add a practical tank bag to your DUKE, this is the way to go.View Detail
Very Good
Ideal for Accessory CaseBecause it is a Suction Cup type, the mark of Suction Cup may be attached. However, it is not a problem because it is a stain of Level that can be removed.View Detail
Excellent
It attached to 2005 model CBR1000RR.Since the
> size is very compact, you do not need to become the obstacle of operation by SS type Motorcycle, either.although the part and a load seldom enter, it is satisfactory if it is a Touring about a dayIt attached to 2005 model CBR1000RR.Since the
> size is very compact, you do not need to become the obstacle of operation by SS type Motorcycle, either.although the part and a load seldom enter, it is satisfactory if it is a Touring about a day's trip -- it is .It did not separate, even if it ran the high speed, since the
> sucker was also powerful.The Clear top which can check a Route by a Touring mapple is found useful very much after
for me who have not attached the Navigation.
Although it is however unavoidable, when it is oil supply, it is troublesome a little.About
> attachment, since my CBR had good Tank form, it was able to make the problem there be nothing.I think that it is the product which has improved with the
> Compact size.View Detail
Very Good
It has attached with ZZR1400, MULTISTRADA1000, CBR1000RR, ZX-14R, and all the Motorcycles.
The Bags of a Magnet type are goods precious in the mainstream still more.
Although it is used in about four years, there is also no collapse of form by It has attached with ZZR1400, MULTISTRADA1000, CBR1000RR, ZX-14R, and all the Motorcycles.
The Bags of a Magnet type are goods precious in the mainstream still more.
Although it is used in about four years, there is also no collapse of form by a Semi-hard Type, and durability and user-friendliness are also cinch.Inside hardly gets wet also to some rain.
What only one sucker tends to separate from in why is charms.View Detail
Most Viewed Reviews Of DEGNER Tank Bags
Very Good
Compact and easy-to-use Large size.I use it for short tours and small purchases.
Was the one you received as per Image?
It was a little smaller than I expected (no problem).
Thanks to its compactness, it does not affect the Riding position even when placed on a tank, making it very useful.
This compactness is especially appreciated for SS models with a strong forward lean and for motorcycle models with low handlebars of the separate type.
How was your experience with it?
Above. It was a little smaller than I expected." The zipper is easy to use, and it has enough storage space for this size.
[Points to note]
It is better to check the size that meets your purpose of use and, in some cases, to check the actual product at a motorcycle accessory store before purchasing it to avoid any regrets later.
Suction cup type may be difficult to adhere to tanks with complicated shapes or matte painted parts.
How did it compare to other products?
Assuming that there are individual differences, the movement of each zipperretc. is smooth without getting caught, and it is a well-tailored product without feeling stress when taking things in and out of storage (I used to have a cheap tank bag that had many zippers that got caught, and it was very frustrating). ).
0Other items that may be useful include
Point and hang of installation
As mentioned above, the suction cup type can be installed regardless of the material, but avoid tanks with a shape that is difficult for the suction cup to adhere to or surfaces with a matte finish.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I fully understand that it is a finishing touch, but I would be happier if it were a little cheaper.View Detail
Excellent
I use it with my phone in it!I use it as Navigationetc. with my phone in it when Touring.
The Suction Cup is not reliable, so I fix it to the Handlebar with Magic tape.
In summer, it is necessary to pay attention to the heat that may be trapped in the case, but it is easy to put on and take off and does not choose the motor cycle.
I have been using it for more than 5 years and have had no problems with durability.View Detail
Very Good
Adhesion is sufficient for driving.Used on NSR250R.
I found it difficult to ride a Motorcycle with Separate handle because there will be almost no space between the chest and the Tank.
However, it is convenient because it is attached simply by stretching it before driving and does not shift during driving.
One problem, which is common to the Magnet formula in general, is that
Magnetic Cards such as CashCardetc. should be placed in a compartment far from the Magnet section.
Card will not be available.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING