8,973.51 PKR
(4,879 JPY)
8,541.29 PKR
(4,644 JPY)
(5% OFF)
4.2 (14 Reviews)
Very Good
In addition to replacing the rear brake hose.I replaced it when I replaced the rear brake hose.
I did not use the Electre Tap that came with it.
The footpeg area has been Refreshingly improved?
Reviews For ACTIVE Pressure Switch Single From Other Webike User
Excellent
Sensitivity is good.I used it on my brembo clutch and it was very sensitive and made it easy to turn the cell without having to grip the clutch.View Detail
Average
Switch saying that there is a feeling, I do not mind.I used it for diverting Brembo radial of net for Race to STREET.
There was a rumor that there is a feeling to enter Switch, but I do not feel it in particular.
Although I used it for 5 years, durability was also no problem.
I think that disconnection will not occur if proper processing of Wiring is done.
You can expect much better durability than loading Micro switch etc.
If there was only one difficulty, it was somewhat late to turn on.
As there is nothing compared to others, it may be just an individual difference.
But in the past it was 10,000 yen, but it is half price now.
Of OEM Witch for brembo's commercial car model MODEL, as well as domestic MASTER
Switch is quite expensive, so at this price you can use
Ali will be the choice.View Detail
Most Viewed Reviews Of ACTIVE Mechanical Brake Switch
Excellent
Sensitivity is good.I used it on my brembo clutch and it was very sensitive and made it easy to turn the cell without having to grip the clutch.View Detail
Very Good
I bought it for a radiphone from F. Landor, so it's not an option.Purchased for the brembo copy of Fu Landor's Rajapon.
The thickness of the lower part of the pivot shaft is different between brembo and landor. I thought about heating the collar and inserting the collar, but it would be inconvenient to do that when changing the lever.
And BodyBody also has a different size than brembo?
Maybe I should have bought the M8 or M10 13mm washer, but I didn't have time, so I shaved off a little bit of the body with Grinder and installed it. It's very easy to use.View Detail
Very Good
Hydraulic Brake Switch haters need it.Installed on a pseudo-flavored Landor Radial master & omega;
There is almost only a Copy product, and this mechanical contact Brake Switch Kit of for Brembo also comes with, but because the kit itself is made by Third Party and it is a half forced flavor, some small processing is indispensable.
You could have done it as a homemade DIY project without using the kit itself, but ω
It is good to apply Screw Lock to the Base plate style aluminum plate located under the Lever after temporary assembly and tighten it moderately because Lever's movement will become reluctant if you tighten it too much!
The mechanical contact brake switch that comes with the kit is two steps lower in quality than the Honda OEM product, so it's better to put it together as a spare.
The Plate of Gold that is attached to the lower part of the DialAdjuster of the Lever is not usable with the Aluminum Collar that comes with the Kit because the diameter is too small.
I think it's much easier to use and has a wider range of adjustments than a miscellaneous homemade DIY product.View Detail
Average
Switch saying that there is a feeling, I do not mind.I used it for diverting Brembo radial of net for Race to STREET.
There was a rumor that there is a feeling to enter Switch, but I do not feel it in particular.
Although I used it for 5 years, durability was also no problem.
I think that disconnection will not occur if proper processing of Wiring is done.
You can expect much better durability than loading Micro switch etc.
If there was only one difficulty, it was somewhat late to turn on.
As there is nothing compared to others, it may be just an individual difference.
But in the past it was 10,000 yen, but it is half price now.
Of OEM Witch for brembo's commercial car model MODEL, as well as domestic MASTER
Switch is quite expensive, so at this price you can use
Ali will be the choice.View Detail
Average
Brake switchThe installation itself is not so difficult, but it was a little troublesome because it would require adjustment. It looks good if Bolt of Lever pivot looks a little bit better using Bolt.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING